Epcoat > Bodyshop > Standard Products > Bodyshop Accessories
Bodyshop Accessories
Walmec Hose
Walcom filters and filter groups mounted on the correct air installation (air compressor outlet, wall air outlets, painting booth) contribute in elevating the quality of work by filtering the air from any impurity which can be generated inside the workplace. They guarantee the use of air perfectly treated of condensation, oil and residual humidity.
Epcoat Spray Mask
Newly conceived HIGH TRANSFER EFFICIENCY spray gun that permits the user to associate the typical methods of a conventional spray gun in terms of pressure, distance and application speed with those of a HVLP spray gun in terms of Transfer Efficiency.
The balance between the internal air passages and the head and nozzle diffusion holes let the operator work with a cap pressure of about 1,2 bar while still achieving > 65 % transfer efficiency.
Ideal for transparent HS and VHS but also excellent for water and solvent bases, the GENESI HTE guarantees high level atomization levels.
IR Lamp
Infrared repair systems are realised in body shops due to
small and medium size damages, mainly on front, back and
lateral panels. Traditionally the spray booth is used to dry
those small surfaces of the body. Unlike the spray booths,
Infrared dryers prove to be more efficient on small body
surface since they allow direct heat application on treated
piece.
Anti Dust Coating
Epcoat Anti dust coating , using in paint booth for avoiding
over spray as well as keep panel clean, no drying application.
over spray as well as keep panel clean, no drying application.
Paint Booth Filters
Celing Filters
Technical Specification
Dust Holding Capacity
Avg. Dust Arrestance
Initial Pressure Drop
Final Pressure Drop
Temp Resistance
Avg. Dust Arrestance
Initial Pressure Drop
Final Pressure Drop
Temp Resistance
: 400 g/m2
: 95%
: 27 Pa
: 450 Pa
: Up To 100C
: 95%
: 27 Pa
: 450 Pa
: Up To 100C
Type
Bonding Process
Model
Classification
Thickness
Bonding Process
Model
Classification
Thickness
: Diffusion Media
: Thermal Bonded &Takified
: NF-580 PS
: F5 (EN779)
: 22mm
: Thermal Bonded &Takified
: NF-580 PS
: F5 (EN779)
: 22mm
Floor Filters
Technical Specification
Dust Holding Capacity
Avg. Dust Arrestance
Initial Pressure Drop
Final Pressure Drop
Temp Resistance
Avg. Dust Arrestance
Initial Pressure Drop
Final Pressure Drop
Temp Resistance
: 750 g/m2
: >70%
: <38 Pa
: 250 Pa
: 177 degree C
/ 350 degree Fahrenheit
: >70%
: <38 Pa
: 250 Pa
: 177 degree C
/ 350 degree Fahrenheit
Type
Bonding Process
Model
Classification
Thickness
Bonding Process
Model
Classification
Thickness
: Mat Type, Glass Fiber
: Thermal Bonded &Takified
: NPS 50
: G3 (EN779)
: 90 mm (3.5’’)
: Thermal Bonded &Takified
: NPS 50
: G3 (EN779)
: 90 mm (3.5’’)
Pre Filters
Technical Specification
Dust Holding Capacity
Working capacity
Working capacity
: 100 – 150 WORKING
HOURS
: 235 g/m2
: 235 g/m2